- Overview
- Features
- Specifications
RediLift™ Tilt Tables
RediLift Tilt Tables are equipped with a Soft Edge on three sides to alert the user when the tilter is in the downward mode.
With capacities up to 6,000 pounds, these tilters position work at angles up to 45 degrees so that workers do not have stretch, lift or bend.
RediLift™ Tilt Tables Features
- Capacities from 750 to 6,000 pounds.
- Three standard platform sizes: 24”, 36” and 48.
- Internally Mounted Power (motor, hydraulic pump and oil reservoir) is easy to remove for repair or maintenance.
- 1/2 HP motor (115/1/60) is standard on RLT Series.
- 1 HP motor (115/1/60) is standard on RMT Series.
- Hand controls standard with 10 foot cord.
- 8” lip is standard.
- Velocity fuse equipped cylinders.
- Meet ANSI MH 29.1 specifications.
- Use NEMA/IEC rated electrical components.
Popular Options
- 30 and 60 degree tilt is available (contact factory)
- Floor standard are available (contact factory)
- Lift table mounted units (Lift & Tilt)
- Foot controls with cover
- 90 degree upender
- Lip to 24”
- Accordion skirts
RediLift™ Tilt Tables Specifications
| Model No. | Tilt Capacity | Raise Time | 24" Platform | Weight* | 36" Platform | Weight* | 48" Platform | Weight* |
| RTL Series (7.5" Lowered Height) | ||||||||
| RTL 45-7.5 | 750 | 20 sec. | 24" x 36.625" | 180 | 36" x 36.625" | 220 | 48" x 48.625" | 260 |
| RTL 45-10 | 1000 | 21 sec. | 24" x 36.625" | 190 | 36" x 36.625" | 240 | 48" x 48.625" | 280 |
| RTL 45-15 | 1500 | 23 sec. | 24" x 36.625" | 220 | 36" x 36.625" | 260 | 48" x 48.625" | 300 |
| RMT Series (7.5" Lowered Height) | ||||||||
| RMT 45-20 | 2000 | 18 sec. | 24" x 36.625" | 380 | 36" x 36.625" | 400 | 48" x 48.625" | 420 |
| RMT 45-40 | 4000 | 20 sec. | 24" x 36.625" | 400 | 36" x 36.625" | 420 | 48" x 48.625" | 440 |
| RMT 45-60 | 6000 | 22 sec. | 24" x 36.625" | 410 | 36" x 36.625" | 430 | 48" x 48.625" | 460 |
*All weights are approximate
All tables tilt up to 45 degrees
